BENSHAW ENHANCED KEYPAD Manual de usuario descargar pdf (Pagina 136)

128

Wake-Up Dly AFN 43

PID Ref AFN 44

PID FB AFN 45

AFN: Wake-Up Dly

43 0.0sec

AFN: PID Ref

44 0.00%

AFN: PID FB

45 0.00%

7 - PARAMETER DESCRIPTION

LCD Display

Range 0.00 to 300.0 seconds (Default 0.0s)

Description This parameter sets the wake-up delay time. When the PID signal (AFN 39 selection) becomes greater

than the Wake Up Level (AFN 41), the drive waits for this Wake-Up Delay time to expire before resuming

output.

See also AFN 39 - PID Sleep

LCD Display

Range 0.00 to 100.00% (view only)

Description This parameter shows the set point for the PID control loop. The set point is expressed as a percentage of

the maximum frequency. The value shown in this parameter can be used to determine whether the control

path of the drive is congured correctly.

LCD Display

Range 0.00 to 100.00% (view only)

Description This parameter shows the feedback signal as a percentage of the maximum frequency. This parameter

may be used to determine if the analog input is congured correctly with respect to span and offset. It can

also be sent to either the Imet or Vmet analog output terminal if the analog output is congured to the PID

feedback signal.

PID Error AFN 46

AFN: PID Error

46 +0.00%

LCD Display

Range 0.00 to 100.00% (view only)

Description This parameter shows the value of the error between AFN 45 - PID FB and AFN 44 - PID Ref.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 181 182

Sin comentarios

BENSHAW ENHANCED KEYPAD Manual de usuario Pagina 136