BENSHAW ENHANCED KEYPAD Manual de usuario descargar pdf (Pagina 93)

EMOPCong FUN04

FUN: EMOP Cong

04 TS no Mem

7 - PARAMETER DESCRIPTION

LCD Display

Description Electronic Motorized Operator Potentiometer. The RSi S4 drive supports a frequency reference control

called EMOP. DRV 05 - Freq Mode 1 on page 78 or DRV 07 - Freq Mode 2 must be set to EMOP. EMOP

allows the reference frequency to be adjusted incrementally using a pair of digital inputs (I/O 02-07) to

activate this function. This is useful if you need ne control of the reference frequency but a

traditional potentiometer is unacceptable (e.g., dirty or corrosive environments). To use a digital input,

congure two digital inputs to functions EMOP + Spd and EMOP - Spd.

The EMOP reference frequency may also be congured to stay at the most recent value or reset to zero

speed when a stop command is received and/or if line power is lost. If congured to reset the reference

speed, the drive reference frequency becomes the minimum frequency upon the next start.

Parameter Value Description

TS no Mem (Default)

Digital Inputs are used to change EMOP reference speed and the EMOP reference speed is lost when the

drive is stopped or power cycles.

TS Mem

Digital inputs are used to change EMOP reference speed and the EMOP reference speed is not lost

when the drive is stopped.

T/K Mem

Either Digital Inputs or the Keypad Arrows can be used to change EMOP reference speed and the

EMOP reference speed is not lost when the drive is stopped or power cycles.

TS stp

Digital Inputs are used to change EMOP reference speed, the EMOP reference speed can be changed

when the drive is stopped and the EMOP reference speed is lost when power cycles.

TS Mem stp

Digital Inputs are used to change EMOP reference speed, the EMOP reference speed can be changed

when the drive is stopped and the EMOP reference speed is not lost when power cycles.

T/K Mem stp

Either Digital Inputs or the Keypad Arrows can be used to change EMOP reference speeds, the

EMOP reference speed can be changed when the drive is stopped and the EMOP reference speed is

not lost when the drive is stopped or power cycles.

Range

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 181 182

Sin comentarios

BENSHAW ENHANCED KEYPAD Manual de usuario Pagina 93